Most of the time your Internet connection isn’t used to it’s full potential. Raising cable and DSL speeds enable home Internet connections to support many more computers than you’ve connected. If you simply use you computer for several hours each day you may consider sharing your Internet connection with neighbors and family to maximize its use and reduce your price.

Virtual Wifi Router

The most important aspect of running a virtual wifi router is receiving a strong signal to your neighbors. The smartest choice would be to mount an external antenna as high as you can on your property. So it’s worth shopping round for a great deal on Ebay antenna can be expensive. I’d urge a 6dB External Omni Directional Antenna for most folks.

Know about different type on antenna connectors. I enjoy the RPTNC connector that is found on Linksys WRT54GL routers, as it is more durable compared to little RP-SMA connector used on other kit. If you do not yet know where you customers will be connecting from it’s better to get an omni-directional antenna. Knowing where they are going to be connecting from you could get a directional or “patch” antenna.

You should have the shortest possible lead between the virtual wifi router and the Antenna when you designing your system. For good signal strength try and keep the lead less than 6′. A great alternative for this is always to install the virtual wifi router in a weather proof or Tupperware box and mount it. You may then need to run the network and electricity connection up the pole but I find it gives the best general result. Splice in a section of low voltage cable to run up to the pole and the safest way to run the power up the pole will be to keep the wall wart inside your house.

Picking a router – The Wonderful Linksys WRT54GL

The WRT54GL virtual wifi router are available for as little as $50. It can easily have the firmware of it’s replaced with OpenWRT or DD-WRT both tiny versions of Linux allowing your own applications to run directly. Then you definitely can install Hotspot Management software on the router and in under 5 minutes you could have a strong WiFi hotspot for less than $100.

The way to command access to your own WiFi Hotspot.

The finest thing to do would be to leave no encryption to your virtual wifi router open. Then anyone can utilize it at no cost.

MAC Address Filtering. A MAC address is a number that is unique that every wireless and network apparatus has. A MAC address look something like this: 01:23:45:67:89:ab Most virtual wifi routers have the ability to only allow specific MAC address access to You could set up MAC filtering in your virtual wifi router then speak with your neighbours and if any of them needed to share the expense of your connection then you could add them.

WPA Key. Another tactic is to create WPA encryption on your own router. You will be asked to enter a WPA Key, which can be like a password when you set it up. You could then give then give the secret to any neighbours who desired to join to your own Internet connection.

The Captive-Portal Site. Your splash page will be an ad for the WiFi service, so you’d want to list how much you charge for access. As you don’t need to visit with your neighbours to see who needs to join a captive portal is excellent; anyone connecting to your WiFi Hotspot gets redirected to your splash page. It is possible to even set up an automated system to take Pay Pal payment for Internet access so you’d not really have to be house to be making money.If you are looking for more information on virtual wifi router, please visit:http://virtual-router.net.

Comments are closed.

Post Navigation